Filter
Top Products
Model T10006 50 Kg Digital Crane Scale-8-
Scale Battery
The scale will automatically display the
current scale battery voltage when you
turn the scale ON and OFF. To check the
voltage during use, press the MR button
on the remote control and the screen will
display SHIFT. Press the F1 button and the
screen will display U X.XX. To return to the
main display, press MR again.
When the battery voltage is lower than
U 5.80, the screen will flash to alert you.
The scale will continue to display for
approximately one minute longer until -Lb-
is displayed on the screen, and then turn
OFF automatically. The scale will need to
be charged before further use.
To recharge the battery:
1. Turn the scale OFF.
2. Connect the supplied adapter into the
socket located in the back of the scale,
then into a grounded 110V outlet. The
light turns orange while charging and
turns red when charging is complete.
Note: The battery should re-charge for
at least 8 hours.
Hold Function
When the load has been added to the
scale, wait until the STB light goes off sig-
nifying that the load is stable (Figure 4). If
you would like the weight value to remain
on the screen, press the HOLD button on
the remote control. To clear the screen,
press the HOLD button again.
Current Zero Value:
The current zero value is the tare weight
that was selected. To view the current
zero scale value, press the MR button and
the screen will display SHIFT. Press the
�
button on the remote control to
display the current zero value.
Advance Tare Weight
To input a known tare weight before weigh-
ing an item, press MR and the screen
will display SHIFT. Press TARE, and the
screen will display 000.00. To input the
desired weight, scroll to the right by press-
ing the right arrow (TARE) on the remote
control until you come to the number that
you would like to change. To increase
the number from zero, press the left but-
ton (
�
) on the remote control. To
decrease the number, press CLEAR on
the remote control. When you are satis-
fied with the current number, press the
M+ to move to the left. To submit the tare
amount, press MR and the TARE light will
come on the scale, automatically deduct-
ing the imputed tare weight. The tare
weight will stay the same until the scale is
turned OFF.
Clear Function
To clear, press the CLEAR button and
the screen will flash CLr. If you would
like to approve the clear command, press
MR and the screen will display 888.88,
confirming the deletion. If you would like
to cancel the clear command, press the
CLEAR button again. The screen will dis-
play noCLr canceling the deletion.
Search Overload Times
To review how many instances the scale
has been overloaded, press the MR button
and the screen will display SHIFT. Press
the CLEAR button and the screen will
display OL=XX, showing how many times
the scale has exceeded its maximum
capacity.
Display Function
To change the brightness of the display,
press F1. Display brightness ranges from 1
(minimum light) to 5 (maximum light). The
default display setting is 2.