Model T10006 50 Kg Digital Crane Scale -5-
Like all tools there is potential danger
when operating this tool. Accidents
are frequently caused by lack of
familiarity or failure to pay attention.
If normal safety precautions are
overlooked or ignored, serious
personal injury may occur.
To maintain accuracy, the scale
should remain hanging and not be
allowed to rest on the ground for a
significant amount of time.
Loading Hardware
When attaching your crane scale:
1. DO NOT use multiple chains or har-
nesses. Only one point of contact
should be used on the hook and shack-
le to lessen the chance of the load fall-
ing and to allow proper load alignment.
2. DO NOT use oversized items or har-
nesses. Oversized items creates mul-
tiple points of contact and will not fit
properly with the crane scale hardware.
Inaccurate readings, uneven, and dan-
gerous loads may result.
Refer to Figures 2 & 3 for Model T10006
dimensions.
Figure 2. Scale front view measurements.
8
3
⁄4"
4"
13
⁄16"
2
3
⁄4"
3
⁄4"
Figure 3. Scale side view measurements.