Filter
Top Products
US0208-INS-LAB-RevD11 • Patriot Homecare Bed 16
CRANK OPERATION: SEMI-ELECTRIC BED ONLY (US0208 / US0208PL)
Use the crank at the center foot of the semi-
electric bed (shown at right) to change bed
height (raise or lower entire deck).
TRENDELENBURG POSITION, ALL MODELS
(HEAD END AT LOWER ELEVATION THAN FOOT END)
1. Lower bed to its lowest height. Disengage the hi/lo rod by compressing the spring button and
removing the hi/lo rod from the motor or bed end.
2. Raise the foot bed end using the pendant hand control or crank (semi-electric bed only). The
head end will remain in the low position.
REVERSE TRENDELENBURG POSITION, ALL MODELS
(HEAD END AT HIGHER ELEVATION THAN FOOT END)
1. Raise bed to its highest height. Disengage the hi/lo rod by compressing the spring button and
removing the hi/lo rod from the motor or bed end.
2. Lower the foot bed end using the pendant hand control or crank (semi-electric bed only). The
head end will remain in the high position.
crank
Crank operation
foot