Graham Field MM7174 Personal Lift User Manual


 
2D:4>6C:42?#65:42=&C@5F4ED25:G:D:@?@762=E9&C@5F4ED?4K#2EC:IK(,#2?F2= &
ccessory Assembly - standard 4” extension pan Kit
A
Item # Qty. Part # Description
1 1 999-0719-001G Standard 4” Extension Pan
2 2 100-5231-001 5/16-18 x .75” Carriage Bolt
3 2 100-6931-001
5/16-18 Wing Nut
4 2 100-7931-006 5/16 x 1.75” Clevis Pin w/Hole
5 2 100-2001-006
1-9/16 Hair Pin Clip
(Use existing)
#$"$* 7-5=./;</6;
2C5H2C628
1. Raise the bed to a comfortable working height and elevate the knee deck to its highest
position. Now unplug the power cord.
2. Separate the footboard assembly from the main frame by removing the existing clevis
pins and hair pin clips. Put aside hardware. You will reuse the clevis pins and hair pin
clips in step 4 below.
3. Attach the standard 4” extension pan (#1) to the foot deck using two 5/16-18 x .75”
carriage bolts (#2) through the top designated holes and secure tightly with two wing
nuts (#3) from the bottom.
4. Now reinstall the footboard assembly by sliding the mounting tubes into the frame,
lining up the holes as shown (Note: The last hole in the tube will now
be one hole closer to the end of the main frame). Re-insert the 5/16 x
1.75” clevis pins (#4) from the outside in and secure with 1-9/16 hair
pin clips (#5).
5. Replug the power cord and verify that all bed functions work properly
and all parts have adequate clearance.
##)#$"%$ #
!$%"
#2EC:I@@E?5H:E9
)E2?52C5@@E3@2C5
"6G6=6C)EC2AD2?5
MIE6?D:@?&2?
Reuse existing Hair Pin Clips