Golden Technologies GB116 Mobility Scooter User Manual


 
Buzzaround XL Owner’s Manual RevA_092210
VII. DISASSEMBLY
Remove the Tiller Basket
5. Remove the tiller basket by pulling up.
Fold Down and Lock the Tiller
6. Push in and turn the tiller lock clockwise 90 degrees. See #1 on figure 17.
This will lock the front wheel to keep it from turning side to side to help control while
carrying.
3
2
1
Figure 17. Lowered Tiller
6. Loosen tiller adjustment knob and fold the tiller down flat. See #2 on Figure 17. Then
tighten the adjustment knob to secure the tiller in its new position. Once the tiller is
lowered and locked, you may use it as a handle for easy transportation. Grab it by the
plastic on the tiller. See #3 on Figure 17.
Separate the Drivetrain from the Frame
Be careful not to pinch your fingers between the frames. This area is a
pinch-point and requires your full attention.
7. Pull up on the drivetrain release lever with one hand to unlock the front and rear frame
sections. See Figure 18.
8. Pull the front frame up and off of the drivetrain. See figure 18.
Figure 18. Separating the Drivetrain and Frame
26