Filter
Top Products
Frequently Asked Questions
• TAT-5000 can be used with either
disposable caps or full sheath.
Can be used without disposables
if terminally cleaned between patients.
• Can be cleaned with any hospital
approved disinfectant, alcohol, and
even bleach solutions. Use only
alcohol solution for sensor lens.
• ”bAtt” on the display indicates a low
battery. Replace with a 9-volt alkaline
battery.
• Probe lens should be shiny clean. If
not, wipe with an alcohol prep or Q-
tip dipped in alcohol. Occassionally
follow with a damp wipe of water to
remove any alcohol residue buildup.
• A low or high reading outside body
temperature range is indicative of
the instrument’s failsafe mode,
signifying a mechanical failure.
• Can be used in either ºC or ºF.
What should I know about the instrument?
Disposable Cover Options
(Model Illustrated: TAT-5000)
No Cover No Cover Probe Cap Full Sheath
Terminal Disinfectant Covers Entire Covers Entire
Cleaning at Wipe Between Probe. Instrument.
Patient. Patients.
Model TAT-5000 All Options
Accessories
1. Combination Unit
PN 134200
2. Instrument Holder (shown with security cable)
PN 134201
3. Cap Dispenser
PN 134202
4. Disposable Caps
PN 134203
5. Security Cables
8 ft. coiled cable PN 124309
8 ft. coiled cable - Latex free - PN 124311
6 ft. vinyl-covered steel - PN 134302
8 ft. vinyl-covered steel - PN 134030
6. Keyless Self-Locking Wall Mount
PN 124305
7. Keyless Self-Locking Wall Mount
(shown with resposable cap dispenser)
PN 124306
13
818528r5:818528r5.qxd 4/24/2008 11:04 AM Page 15