Filter
Top Products
Quick Start Guide
23
February 2015
Special Conditions for Safe Use (X):
1. When the thread adapter is used with an enclosure in type of protection increased
safety “e” the entry thread shall be suitably sealed in order to maintain the ingress
protection rating (IP) of the enclosure.
2. The blanking plug shall not be used with an adapter.
3. Blanking Plug and Threaded Adapter shall be either NPT or Metric thread forms.
G
1
/2 and PG 13.5 thread forms are only acceptable for existing (legacy) equipment
installations.
Additional Certifications
SBS American Bureau of Shipping (ABS) Type Approval
Certificate: 09-HS446883A-PDA
Intended Use: Measure gauge or absolute pressure of liquid, gas or vapor applications
on ABS classed vessels, marine, and offshore installations.
ABS Rules: 2009 Steel Vessels Rules 1-1-4/7.7, 4-6-2/5.15, 4-8-3/13.1
SBV Bureau Veritas (BV) Type Approval
Certificate: 23155/A3 BV
Requirements: Bureau Veritas Rules for the Classification of Steel Ships
Application: Class notations: AUT-UMS, AUT-CCS, AUT-PORT and AUT-IMS; Pressure
transmitter type 3051 cannot be installed on diesel engines
SDN Det Norske Veritas (DNV) Type Approval
Certificate: A-14086
Intended Use: Det Norske Veritas' Rules for Classification of Ships, High Speed & Light
Craft and Det Norske Veritas' Offshore Standards
Application:
SLL Lloyds Register (LR) Type Approval
Certificate: 11/60002
Application: Environmental categories ENV1, ENV2, ENV3 and ENV5
C5 Custody Transfer - Measurement Canada Accuracy Approval
Certificate: AG-0226; AG-0454; AG-0477
Table 13. Thread Adapter Thread Sizes
Male thread Identification mark
M20 ϫ 1.5 M20
1
/2 - 14 NPT
1
/2 NPT
G
1
/2A G
1
/2
Female thread Identification mark
M20 ϫ 1.5 - 6H M20
1
/2 - 14 NPT
1
/2 - 14 NPT
PG 13.5 PG 13.5
Location classes
Type 3051
Temperat ure D
Humidity B
Vibration A
EMC B
Enclosure D