Filter
Top Products
- 21 -
GB
GB
e) When the blood pressure measurement has been taken, the systolic, diastolic and pulse
values will be shown for 1 minute in the display and the data will automatically disappear
after this time. During the display time, the appliance can be switched off by pressing the
START/STOP button.
f) If no button is pressed for 1 minute and no function is used during this time, the energy
saving function will switch the appliance off automatically.
• To save, check and delete the measured data:
a. Save data:
After each blood pressure measurement, the systolic, diastolic, and pulse data of the
respective measurement will be saved automatically.
The available database can store up to 99 measurements.
If the number of measurements exceeds 99, the oldest measurement will be deleted
automatically.
b. Check data:
By pressing the MEMORY button, the database can be selected and, simultaneously, the
number of full memory spaces will be shown in the upper edge of the LCD display.
If no memory space is taken, NONE is indicated.
Press MEMORY button to check the
most recent measurement.
Systolic and diastolic blood pressure, pulse value, time, and date are shown.
Press MEMORY button again to check the other measurement values, sorted by save order.
To return to normal display, press START/STOP button.
c. Delete data:
Delete all data:
Remove batteries from the battery compartment and reinsert them. All data will be deleted.
Press MEMORY button, to check if the data has been deleted. If done correctly, no data
will be shown in each database.
BM122.qxp 9/10/07 2:24 PM Page 21