Filter
Top Products
The following photograph shows where the “SEL,” “IR,” “DIFF,” and “AMB” buttons
are located:
2.8 “DATA” OUTPUT
He “DATA” output is on the upper right hand side of the face place of the AGRI-
THERM II. The instrument is provided with a signal cord to connect to a data
logger through this receptacle. No data is stored in the infrared thermometer
itself. The “DATA” connection provides for the capability of running the AGRI-
THERM II continuously and sending the data to an outside source where the analog
signal can be converted to a digital signal and the data can be logged and saved.
T
7