Filter
Top Products
M10 wrench
1. Use an M10 wrench to
loosen the adjustment
bolt until the wheel lock
slides on the frame.
2. Place the wheel lock in
the locked position and
slide it into contact with
the tire.
3. Place the wheel lock in
the unlocked position
and slide it
3
/8" closer to
the tire.
4. Use an M10 wrench to
tighten the adjustment bolt and engage the wheel lock to check the
fit. The wheel lock should indent the tire at least
3
/8".
5. Repeat steps 1-4 for other wheel lock. Tighten the adjustment bolts
securely to eliminate wheel lock movement on frame.
WARNING: Ensure that wheel locks are adjusted so that they
lock in place appropriately before occupying or operating
wheelchair.
rightrearwheel
wheel lock
shown unlocked
rightfrontframe
adjustmentbolt
wheellock