Filter
Top Products
notReady(4)
The remote flash BIOS’s state is not ready.
canceled(8)
The remote flash BIOS has been canceled.
pending(16)
The remote flash BIOS update is pending.
other(32)
The remote flash BIOS state/setting is not one of
the previous values.
Table 544. Remote Flash BIOS Completion Code
Variable Name: DellRemoteFlashBIOSCompletionCode
Data Type: Integer
Possible Data Values Meaning of Data Value
completionCodeIsOther(1)
The completion code status is not one of the
following:
completionCodeIsUnknown(2)
The completion code is unknown (not known or
not monitored).
completionCodeIsOK(3)
This completion code completed successfully.
completionCodeIsBadImage(4)
This completion code is a bad flash BIOS image.
completionCodeIsNoFileAccess(5)
Flash BIOS could not be accessed.
completionCodeIsNotReady(6)
Flash BIOS memory not ready.
completionCodeIsDisabled(7)
Flash BIOS is currently disabled.
completionCodeIsNoBattery(8)
A battery must be installed.
completionCodeIsNoChargedBattery(9)
A fully charged battery must be installed.
completionCodeIsNoExternalPower(10)
An external power adapter must be connected.
completionCodeIsNo12VoltSet(11)
12 volts (V) could not be set.
completionCodeIsNo12VoltRemoval(12)
12 V could not be removed.
completionCodeIsFlashMemoryFailed (13)
A flash memory failure occurred.
completionCodeIsGeneralFailure(14)
A general failure occurred.
completionCodeIsDataMiscompare(15)
A data miscompare error occurred.
completionCodeIsNoImageFound(16)
The flash BIOS image could not be found in
memory.
completionCodeIsNoUpdatePerformed (17)
No update operation has been performed.
Port Group
The Port Group provides information about the different types of ports that may be present in your
system. This management information base (MIB) group also provides information about the capabilities,
states, and settings that are possible for each port.
149