Filter
Top Products
Table 3. Server Administrator Field Replaceable Unit MIB Sections in This Guide
Section Topic MIB Group Numbers
22 Field Replaceable Unit Group — provides information
about field replaceable units that may be present in your
system
2000
Server Administrator Change Management MIB
The Server Administrator Change Management MIB (filename dellcm.mib) provides management data
that allows you to monitor the inventory of devices and applications with SNMP management
applications.
The following table describes each Server Administrator Change Management MIB group and lists the
MIB group number assigned to the MIB group. The Server Administrator Change Management MIB
groups are identified by the SNMP OID 1.3.6.1.4.1.674.<MIB group number> where <MIB group number>
is the MIB group number assigned to the MIB group. See the relevant section for more information about
the MIB objects defined in a MIB group.
Table 4. Server Administrator Change Management MIB Sections in This Guide
Section Topics MIB Group Number
24 Change Management Group -
describes the inventory data provided
by the Change Management MIB that
allows users to monitor devices and
software present on a particular
managed computer chassis
10899
Basic Terminology
It is important to have a good understanding of the key technical terms used in this guide. This guide
provides definitions for all essential terms used in describing the Server Administrator MIBs. For definitions
on all essential terms and acronyms, see the Glossary available on the Dell Support website at dell.com/
support/manuals.
Frequently Used Terms in Variable Names
The following terms are frequently used in the name of a MIB variable:
Capability refers to the actions an object can perform, or to actions that can be taken by the object. Hot-
pluggable is an example of a capability. If a card is hot-pluggable, it can be replaced while a system is
running. Capability settings refer to the capabilities of the object that the user can select from and
activate if desired. Capability settings allow users of the server administrator to predetermine how an
object behaves under specific conditions.
Settings are the conditions of a manageable object that determine what happens when a certain value is
detected in a component. For example, a user can set the upper critical threshold of a temperature probe
to 75 degrees Celsius. If the probe reaches that temperature, the setting causes an alert to be sent to the
12