Filter
Top Products
SECTION 8. TROUBLE SHOOTING
If your Power Chair will not go, follow this checklist
1. Check that the lights on control box are illuminated.
2. If there are no lights on controller, check that all leads/plugs, which connect to
controller, are pushed in properly.
3. Check that the motor cables are properly connected
4. Check all battery wiring is connected.
5. Check that battery box connector is plugged in.
6. Check circuit breaker located on the battery box lid. The circuit breaker will
trip when the wheelchair is stalled for a prolonged period or if a major fault has
occurred. If circuit breaker continually trips for no apparent reason, cease use
and contact nearest Glide Products service agent. Important: Allow 60
seconds before resetting circuit breaker.
7. If you still have problems after reviewing the above checklist, please contact
your nearest Glide Rehabilitation Products Agent or Glide Rehabilitation
Products direct.