Filter
Top Products
- Eng 17 -
English
MEASURING YOUR BLOOD PRESSURE
4 Place the cuff at the height of the heart.
5 Press the START/STOP switch (the yellow
switch).
* If the pressurization value exceeds 280mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
START/STOP switch again. The cuff defl ates, and the power turns off.
1 The measurement is displayed for
approximately two seconds.
* lights during the fi rst measurement
performed after the battery is replaced.
2 The cuff is pressurized according
to the chosen pressurization setting
value.
* If the unit judges that pressurization
is insuffi cient, it automatically
repressurizes to the next higher
pressurization value.If it is still
insuffi cient, “Err 1” is displayed and
measurement is cancelled. Reset the
pressurization setting value according
to step 3, then press the START/STOP
switch again.