Filter
Top Products
- Eng 16 -
English
SETTING THE CLOCK
11 Changeover of the “time system”
• After the completion of the day-of-the-month correction as
described above, press “MODE” switch to place the unit in
the time system selection state.
• Every time “SET” switch is pressed, the 12-hour system
(12H) and (24H) will be changed over.
• Press “MODE” switch after activating the time system
indication on the display to revert the display to the time
indication. This completes the clock setting procedure.
12 How to set the alarm
• While the alarm symbol is shown on the display, the alarm will sound for 30 seconds
when the alarm time is reached. The alarm sounds only when the time indication is
shown on the display.
• To stop the alarm, press any switch.
• To change over the alarm status between SET/RELEASE, press “SET” switch while the
time indication is shown on the display.
SET
switch
1s
later
Time indication
(without alarm)
Alarm time indication
Time indication
(with alarm)
Alarm mark
SET switch