Filter
Top Products
- Eng 14 -
English
SETTING THE CLOCK
3 Correcting the “minute” of an alarm time
• Press “MODE” switch for one second or more to place the
unit in the alarm-time minute correction state.
• Press “SET” switch to increase the minute of the alarm time
in increments of one minute.
4 Correcting the “hour” of an alarm time
• After the completion of the alarm-time minute correction as
described above, press “MODE” switch to place the unit in
the alarm-time hour correction state.
• Press “SET” switch to increase the hour of the alarm time in
increments of one hour.
5 Correcting the “second” of the current time
• After the completion of the alarm-time hour correction as
described above, press “MODE” switch to place the unit in
the current-time second correction state.
• Press “SET” switch to reset the second indication to 00.
Press “SET” switch according to a time signal. Note that
the minute indication on the display will advance when the
seconds given is 30 to 59 seconds of a minute.
6 Correcting the “minute” of the current time
• After the completion of the current-time second correction as
described above, press “MODE” switch to place the unit in
the current-time minute correction state.
• Press “SET” switch to increase the minute of the current time
in increments of one minute.