Filter
Top Products
- Eng 22 -
English
Icon displayed Condition/Cause Corrective action
Insuffi cient pressure. Repeat measurement
again.
Appears when the blood-
pressure could not be
measured accurately.
Reapply cuff properly and
measure again.
The pressure is 281
mmHg or higher.
If the pressure does not
automatically decline
during measurement,
immediately press the
“START/STOP” switch
and turn the unit off. To
take the measurement
again, refer to P.17
and correctly re-apply
pressure.
Appears when the
batteries are running low.
Replace the batteries.
Detected problem in the
device.
Ask purchased store.
KEY TO DISPLAY ICONS