Filter
Top Products
- Eng 17 -
English
MEASURING YOUR BLOOD PRESSURE
1 Wrap the arm cuff tightly around your
arm.
( See page 14 “ATTACHING THE ARM
CUFF”.)
2 Plug the air hose connector into the
main unit.
• Plug the air hose connector fi rmly into the air
hose socket on the main unit as illustrated.
3 Sit in the recommended position.
( See page 13 “ TIPS FOR OBTAINING ACCURATE MEASUREMENTS”.)
4 Start measurement.
• Press the "START/STOP" switch.
The air pressure is increased and then
slowly decreased. When a pulse is
detected, the measurement icon
starts
fl ashing.
After the blood pressure measurement
is taken, the systolic pressure, diastolic
pressure and pulse rate are shown on the
display for 1 minute, after which the display turns off unless other instructions
are given.
5 Storing, recalling and erasing measurement data
• Storing data
As long as the unit functions correctly, the blood pressure and the pulse
rate for the result with the record of the time and date are automatically
stored in memory as one set of data.
Up to 48 sets of measurement data can be stored in the memory. If you
measure your blood pressure when 48 sets of measurements have
already been stored in memory, the earliest set of measurements is
automatically deleted to make way for the new measurements.