Filter
Top Products
MCB1U / LCB1U Installation Instructions
8
Attaching Displays to Ceiling Mount
1. Ensure that the latch mechanisms on interface brackets
(FF) are already lowered. (See Figure 5)
2. While supporting both sides of display, lower display onto
ceiling mount, hooking top of interface brackets onto front of
ceiling mount. (See Figure 7)
WARNING: IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! The displays MUST
be centered on each side of ceiling mount.
Figure 7
3. Raise the latch mechanism on both interface brackets to
lock display in place. (See Figure 7)
4. Fasten bracket against ceiling mount extrusion using one
10-24 x 5/8" button head cap screw (Y). (See Figure 8)
5. Repeat for remaining interface bracket on display.
6. Repeat Steps 1 - 5 for remaining display.
Figure 8
Adjustments
CAUTION: Watch for pinch points! Do not place fingers
between moveable parts.
IMPORTANT ! : Always use two hands (one at bottom of
display and one at top of display) to adjust ceiling mount.
Roll
The ceiling mounts allow up to 3° roll each direction.
1. Turn the roll adjustment screw in the direction necessary for
the desired roll. (See Figure 9)
2. Stop adjusting when the desired setting is reached.
3. Repeat for other mounting rail on opposite side of mount.
Figure 9
2
3
3
Latch
mechanism
(Ceiling mount not shown for clarity)
4
(Y) x 4
5
1
Roll adjustment screw
(side view)