Chauvet LED-FS1 Wheelchair User Manual


 
COLORstrip™ Footswitch User Manual Rev. 3 Page 7 of 10
4. OPERATION
Foot
Controller
Functions
The COLORstrip™ Foot Controller provides quick access to the COLORstrip’s built-in
programs, blackout function, static colors, strobe speed, and chase programs.
Please
refer to the Product Overview to see the button locations on the Foot Controller.
Button Function
<1>
Scene
This button allows the user to cycle through the stand-alone programs
in the COLORstrip™ product
. You can click the button once for each of
the programs to cycle through slowly, or hold down the button to cycle
through the programs faster
. For a detailed description of the programs
built into the unit, download the COLORstrip™ or COLORstrip™ Mini
User Manual. To stop the auto programs from running once Scene <1>
has been pressed, use the Blackout <4> function.
<2>
Speed
This button allows users to select the run speed (mode P.) and/or flash
speed (mode F.) of the selected program. If both speeds are available
in a given mode, both will change at the same rate
unless the product
is set to custom starting values (see the COLORstrip™ User Manual
for program details). The Speed <2>
button may be clicked once to
slowly cycle through individual speeds, or held
down to increase
speed. The speed can be adjusted from 000~
100, with two separate
corresponding values, which are dependent upon the program being
accessed (see table below).
<3>
Function
This button allows users to quickly place the COLORstrip™ unit into
Sound-Active mode. To exit the sound function, use the Scene <1>
button to select the program you wish to activate, or Blackout the
product.
<4>
Blackout
This button disables all output from the unit.
If the button is clicked with
the unit already in Blackout <4> mode, it will immediately resume the
last running program.
Speed <2>
Button
Functions Table
Program
Value
Speed <2> Functions
A001~A007
000~099
100
Run speed increases as flash speed increases
Flash with sound, Blackout without sound
A008~A011
000~050
051~100
Slow to fast
Activates sound-active mode within these
programs; defaults to auto speed when no sound
is present.
A012~A020
000~050
051~100
Slow to fast
Activates sound-active mode within these
programs; defaults to auto speed when no sound
is present.
A021 000~100 RGB color mixing, 000~100 for each
A022 000~100 Color fade, slow to faster