Filter
Top Products
Page 4 of 10 COLORstrip™ Footswitch User Manual Rev. 3
Product at a
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Fixed voltage (120 V or 230 V)
Switchable voltage (120 V/230 V)
Auto-ranging Power Supply
x
Sound-Activated
x
Replaceable Fuse
Circuit breaker
x
DMX
x
User-Serviceable
x
Master/Slave
x
Duty Cycle
x
Safety Notes
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
· Always connect the product to a grounded circuit to avoid the risk of electrocution.
· Always disconnect the product from the power source before cleaning.
· Make sure the power cord is not crimped or damaged.
· Never disconnect the product from power cord by pulling or tugging on the cord.
·
Make sure there are no flammable materials close to the product when operating.
· Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
· The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
· Always install the product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
· Never connect the product to a dimmer.
· Never carry the product from the power cord or any moving part. The maximum
ambient temperature (Ta) is 104° F (40° C). Do not operate the product at higher
temperatures.
· In the event of a serious operating problem, stop using the product immediately.
· Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
· Keep this User Manual for future consultation. If you sell the product to another
user, be sure that they also receive this document.