Filter
Top Products
Page 2 of 8 HPK-150 Installation and Operating Instructions
02/05/10 CP5061A
GENERAL DESCRIPTION
The HPK-150 is a complete electronic simulated air-horn system. The system includes a water-
proof amplifier with matching speaker along with a switch panel. The switch panel allows chang-
ing between the vehicle horn and air-horn and includes a switch for emergency lighting. The
amplifier utilizes short circuit, and reverse polarity protection systems for maximum service life. A
power indicator light is provided on the amplifier for diagnostics.
SPECIFICATIONS
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and information,
contained in this manual at any time without notice.
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.
See www.carson-mfg.com for latest information.
Amplifier (HA-150-10 14)
Speaker Load Single 100W 11 ohm
Input Voltage 9 - 16 VDC
Input Current 8 AMPS (14 VDC)
Output Power 105 WATTS RMS MAX. (15 VDC)
Short Circuit Current 50 AMPS (supply circuit must be capable of supplying this for 1 second)
Operating Temp. -22° F to +200°F
Size 4-1/8" Long, 2-1/8" Wide, 1-1/2" High
Weight 1 LB.
Speaker (CSP-100B)
Power Handling 100W
Impedance 11 ohm nominal
Frequency Range 400 Hz to 3500 Hz
Size 6.34” Wide, 5.10” High, 2.36” Deep
Weight 6 LBS.
Switch Panel (SP-200)
Voltage 12VDC
Current 15ADC Max.
Size 3-3/4” Wide, 1-1/4” High, 1-3/4” Deep