Filter
Top Products
1. To clean the double aerator mixing blade,
fill the milkshake cup to the maximum fill line
with warm soapy water. Operate the Breville
Shake Creations as previously described in the
operating instructions.
2. Always switch the appliance ‘off’, switch the
power off at the power outlet and then remove
the plug before cleaning the motor housing. Wipe
the motor housing with a damp cloth. Ensure that
the cloth is not excessively wet, and that no
moisture enters the vents on the motor housing.
3. Wash the milkshake cup in warm soapy water or
alternatively place in the dishwasher.
Care and cleaning
7
Operating your Breville Shake Creations
6
1. Place the Breville Shake Creations on a dry, level
surface. Plug the unit into a 230/240 volt
power outlet.
2. Combine ingredients for milkshake or fruit drink
in milkshake cup. Do not fill beyond the
maximum fill line.
3. Insert the cup in the Breville Shake Creations
ensuring the top of the cup is located behind
the top cup retainer. The base of the cup should
reset on the bottom cup bracket.
4. Switch on at the power outlet.
5. Press the on-off button to activate the
Breville Shake Creations. When the milk shake is
combined fully, press the on-off button again to
stop the unit.
6. Remove the milkshake cup and serve.
No more than 1 minute is required for making
any drink. Operate for no longer than 10
minutes total at one time.
Note
NEVER IMMERSE THE CORD, PLUG OR BREVILLE SHAKE CREATIONS BODY IN WATER
OR ANY OTHER LIQUID.