Braun IRT 4520 Thermometer User Manual


 
8
– been exposed to very hot or very cold tempera-
tures, or
– been recently swimming or bathing.
In these cases, remove the individual from the
situation and wait 20 minutes prior to taking a
temperature.
Use the untreated ear if ear drops or other ear
medications have been placed in the ear canal.
Memory mode
The last temperature taken is stored in its memory
and will be automatically displayed when it is turned
on again. The display will show «MEM».
IRT 4520:
This model stores the last 8 temperature measure-
ments. To display the stored measurement, the
thermometer must be turned on. Then press the
«I/O» button for at least 1 second. The display shows
the memory number (e. g. MEM 1), and when
releasing the «I/O» button, the stored temperature
for that memory number is displayed, together with
«MEM». If «I/O» button is pressed too long, the
thermometer will be switched off. Each time the «I/O»
button is pushed, the remaining memory numbers
are displayed (up to MEM 8).
MEM 1 is the most current reading, MEM 8 is the
oldest.
The memory mode is left automatically after
displaying the oldest reading, or after pressing the
«I/O» button for at least 1 second.
IRT4520/4020_NA_S4-42 Seite 8 Freitag, 18. August 2006 11:33 11