Filter
Top Products
Advanced Adjustments 17
1 Turn the Brightness knob once to enter the
Focus menu. The first focus adjustment
appears: Static Focus.
2 Turn the Brightness knob to adjust static
focus.
Static focus has effect on the complete
screen.
3 Turn the Contrast knob to switch to the next
focus adjustment. This is the first of 9 zone-
dependent focus adjustments.
4 Turn the Brightness knob to adjust the focus
in the selected zone.
5 Turn the Contrast knob to select the next
zone.
Focus
Geometry
1 Turn the Brightness knob once to enter the
Geometry menu. The first geometry
adjustment appears:
H(orizontal) Blanking Left.
2 Turn the Brightness knob to adjust.
3 Turn the Contrast knob to switch to the next
adjustment.
The geometry adjustments are:
Important: VP Width is a service
adjustment. It can be done by means of the
proper tools only. The adjustment is
described in the Service Manual.