Filter
Top Products
31
stops adjustment, rudder cable tensioning, clearance fits, securing.
Adjust, replace worn-out parts, grease, secure.
Flap Control
Check free movement of flap control lever, stable bearing in every flap
position, interlock pin wear. Replace worn-out parts, grease, secure.
x
Canopy – Open / Close
Check quality and function of locks and hinges, canopy bearing. Adjust,
replace worn-out parts, grease, secure.
x
Flight Control Instruments
Check legibility, markings, attachment instruments in panel, installations,
wiring.
x
Electric Installations
Check quality, integrity and purity of cables, insulations, contacts and
welds. Battery attachment, working condition.
x
Safety Belts
Check fixing points rigidity, belt surface quality, adjustment.
x
Fuel System
Check leak-proof condition, fuel supply quality, fuel pumps and valve
function, tank de-aeration. Replace fuel filters.
x
Parachute Rescue System
Check general condition, attachment. Do mandatory work as per
instructions of rescue system manufacturer.
x
Landing Gears
Main Gear
Check attachment rigidity, surface quality, degree of permanent
deformation.
x
Wheels
Check attachment, brakes condition, brake pads, disc quality, leak-proof
condition. Attachment and purity of wheel spats.
x
Front Gear
Check general condition, integrity, rubber damper, clearance, springing
deflection, steering quality. Grease sliding bearings, replace rubber
springs if worn-out.
x
Fuselage
Check general condition, integrity. Antennas, lights and coverings
attachment.
x
Wing
Check general condition, surface quality, integrity, attachment, fittings,
clearance. Ailerons and flaps condition, surface quality, hinges,
clearance, securing. Controls condition, free movement, end positions,
clearance. Pitot tube condition and attachment.
x
Tail Surfaces
Rudder, Elevator
Check general condition, hinges, movement, clearance, securing.
x
HT Stabilizer
Check general condition, attachment, fittings, securing.
x
10 25 50 100 200