Filter
Top Products
This monitor automatically stores up to sixty (280) blood pressure and pulse
measurements in memory. Measurements stored in memory are assigned an
index number in the order of the newest to the oldest.
To retrieve readings, follow these simple steps:
1. When the display screen is showing only the time, press
and quickly release the Memory ("M") button. You will see
the date and time of the most recent blood pressure that
was taken followed by the measurement.
2. If you want to retrieve other measurements in memory,
press and release the Memory button repeatedly until the
desired date and time of the measurement are reached. The
measurement will then be displayed.
3. The display will shut off automatically a few seconds after
the readings are displayed.
To clear the measurement history from memory, press and hold the Memory
button for at least five seconds while the display screen is showing only the
time. Release the Memory button when you see the M symbol in upper left
hand corner of the display flash and disappears. This indicates that the
memory has been cleared.
If there are no measurements stored in memory, you will see dashes in the date
and time fields followed by a measurement of three 0s displayed vertically.
NOTE: This unit continues to store readings in memory when batteries or
AC power is removed.
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
E-13
ABOUT MEMORY