Filter
Top Products
Setting the Alarm
The UA-787 Quick Response monitor allows you to set up to three alarms
per day to notify you when to take your blood pressure. To set the alarm(s):
1. Press and hold the clock button until the digits start
blinking. Then press and release the memory button.
"P-1" will be shown at the middle of the display screen
indicating that this is the first alarm.
NOTE: If you do not wish to set an alarm, press the mem-
ory button several times to return to the main screen or
allow the display to disappear after 30 seconds.
2. Select the hour using the START button and press the
clock button to set the hour and move to the minute selection. After
selecting and setting the minute, press the memory button to complete
the alarm setting.
3. The display will move onto the second alarm setting and conclude with
the third alarm setting. Repeat the previous step if you need a second or
third alarm.
When the alarm is set, a "P" will appear on the main screen.
If you do not see a "P" on the main screen, press the clock
button to activate the alarm function. When the alarm
sounds, it will last for one minute. To turn the alarm off
immediately, press the START button.
NOTE: To deactivate the alarm function, simply press the
clock button once. You can reactivate the alarm function
by pressing the clock button again.
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
E-7
TAKING YOUR BLOOD PRESSURE