Filter
Top Products
Operation Mode
1. Normal Measurement With Storing Data ( Refer to page 8)
Press the START button. Blood pressure is measured and data is stored
within the device. The device can store the last thirty sets of data in
memory automatically.
2. Recalling Data
Press and hold the START button to recall the
data. Stored data are automatically displayed in
order from the last data.
Press and hold
Data number
Stored Data
Alternation
The device can store the last thirty sets of data
in memory automatically.
3. Clearing Data
Remove batteries to clear all data. Re-install them again.
4. Measurement With The Desired Systolic Pressure
Refer to page 9 for the measurement with the desired systolic pressure.
English 5