Filter
Top Products
15
1
Remove the glucose calibrator package from the
new box of test strips.
2
Open the calibrator package. Find the
three raised bumps on the calibrator
package. Peel the clear cover away
from the three raised bumps.
3
Hold the calibrator with the LOT 00000
number facing you.
4
Insert the calibrator into the strip port.
Push it in until it stops.
The Display Check shows on the display
window, followed by the time, month,
and day.
Next, the LOT number shows on the
display window:
LOT 00000
Then you hear the beeper, if the beeper is ON.
5
Check that LOT 00000 appears on the monitor
display window and test strip calibrator. This lot
number WILL NOT match the test strip instructions
or test strip foil packet.
Calibrating
Your Monitor
ART21258_Rev-A-Man.indd 18 1/12/10 3:38:22 PM