Auto Chapter
During recording, chapter markers are added automati-
cally at fixed intervals. You can set this interval to 5 min-
utes or 10 minutes. To turn off automatic chapter mark-
ing, select “None”.
DISC
Disc Initialize
If you load a completely blank disc, the recorder will ini-
tialize the disc.
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
DVD-RW: The Initialize menu will appear. Select “VR
Mode” or “Video Mode” then press ENTER ().
Also, you can format the disc from the Setup menu as
below (DVD-RW disc only).
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the DISC option.
33
While the DISC option is selected, press B to
move to the second level.
44
Use v / V to select the “Disc Initialize” option.
55
Press B to move to the third level.
“Start” icon is highlighted.
66
Press ENTER (
).
Disc Initialize menu appears.
77
Use b / B to select a desired Disc Initialize
Mode (VR Mode or Video Mode) then press
ENTER (
).
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
24
Before Operation (Continued)
