A SERVICE OF

logo

5 - 57
CHAS
SWINGARM
3. Install:
Bearing 1
Oil seal 2
To connecting rod.
N
OTE:
Apply the molybdenum disulfide grease on
the bearing when installing.
Install the bearing by pressing it on the side
having the manufactures marks or numbers.
Installed depth of bearings
a
:
5 mm (0.20 in)
Swingarm
1. Install:
Bush 1
Thrust bearing 2
Oil seal 3
Collar 4
To swingarm 5.
N
OTE:
Apply the molybdenum disulfide grease on the
bushes, thrust bearings, oil seal lips and con-
tact surfaces of the collar and thrust bearing.
2. Install:
Collar 1
Washer 2
To relay arm 3.
N
OTE:
Apply the molybdenum disulfide grease on the
collars and oil seal lips.