Floppy Disk Save and Load
61
PSR-450 Owner’s Manual
e Press the [UTILITY] button again.
You can exit from the format mode by pressing the [UTILITY] button one
more time.
r Press the [EXECUTE] button.
“yES Sure?” will appear on the display, asking you to confirm that you want
to proceed with the format operation.
t Execute the format operation.
Press the [+/YES] button to begin execution of the format operation. “Forma-
tin” will appear on the display while the disk is being formatted.
You can abort the format operation by pressing the [–/NO] button.
Exit from the format mode by pressing the [UTILITY] button.
“Complete” will appear on the display when the format operation has been
completed.
• When the floppy disk’s write-
protect tab is set to ON (see
page 6) or the disk is a pur-
posely “copy-protected” disk, a
“Protect” message appears,
indicating that the Format func-
tion is not possible.
NOTE
Format?
CUE
Sure?
YES
• While the file is being For-
matted (“Formatin” message
appears on the display),
never eject the floppy disk or
turn the power off.
CAUTION
Formatin
072
Complete
---
