Floppy Disk Save and Load
57
PSR-450 Owner’s Manual
This procedure loads user songs you have to floppy disk or style data from the
supplied floppy disk into the PSR-450 for use.
1
Insert the floppy disk into the disk drive.
Insert the floppy disk containing the data you want to load.
2
Press the [LOAD] button.
A file name will appear on the display.
You can exit from the load mode at this point by pressing the [LOAD] button
a second time.
■ Saving SMF (Standard MIDI Format) Format 0 Files
SMF format is a standard format for saving MIDI music data. To save PSR-450 song data in SMF Format
0, perform the following steps after performing step
2 on page 55.
2-1 In step 2 on page 55 of the above Save operation,
after pressing the [SAVE] button, press the [SAVE]
button again to call up the SMF Save mode.
2-2 Press the [EXECUTE] button.
2-3 Select a song for saving, if necessary, using the
[+] and [–] buttons.
2-4 Press the [EXECUTE] button.
Continue with step 3 on page 56 of the Save operation
above.
to SMF?
User 1
S-S
Load
• If the [LOAD] button is pressed
when there is no floppy disk
inserted into the disk drive, a
“No disk” message appears at
the top of the display, and all
disk operations will be disabled.
NOTE
This type of file name will appear when the
file is an user file.
Style files appear as “L-S”.
FILENAME
L-U
