![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/22/822dfb37-cdcc-4a60-805c-c8eae014694f/822dfb37-cdcc-4a60-805c-c8eae014694f-bgc7.png)
199
MOTIF Reference
Song Job mode
Reference Song mode
● [F3]-03 Erase Event
This Job clears all specified events from the
specified range, effectively producing a segment of
silence.
• Event Type
Determines the event type to be erased.
All events are cleared when ALL is selected.
Individual control change numbers can be specified when
erasing control change events.
❏ Settings
When TR is set to 0
1~16:
Note (Note events), PC (Program Change), PB (Pitch
Bend), CC: 000-127, all (Control Change, Control
Change number), CAT (Channel Aftertouch), PAT
(Polyphonic Aftertouch), EXC (System Exclusive), All
(all events)
When TR is set to “tmp” (T
empo):
tmp (tempo)
When TR is set to “scn” (Scene):
Scene Memory (Scene change information), Track
Mute (Track mute setting change information)
n Keep in mind that applying this Job to a track with
sample voices erases the events that trigger the
samples, but it does not erase the actual samples
themselves.
● [F3]-04 Extract Event
This Job moves all instances of specified event data
from a specified range of a track to the same range
in a different track.
One useful application for this would be to extract
all instances of a certain note out of a track, and
send them to a new track for separate editing.
• Track and range in which data is extracted
❏ Settings Track 01~16
Range 001:1:000~999:16:479
• Event Type
Selects the event type to be extracted.
Specific note and control change numbers can also be
specified as required.
❏ Settings Note (Note : Note number), PC (Program
Change), PB (Pitch Bend), CC: 000-127, all
(Control Change, Control Change number),
CAT (Channel Aftertouch), PAT
(Polyphonic Aftertouch), EXC (System
Exclusive)
• Destination track
❏ Settings 01~16
● [F3]-05 Create Continuous Data
This Job creates continuous pitch bend or control
change data over the specified range.
• Event Type
Determines the event type to be created.
❏ Settings PB (Pitch Bend), CC: 000-127, all (Control
Change, Control Change number), CAT
(Channel Aftertouch), EXC (System
Exclusive), tmp (Tempo)
• Data Range
Determines the lower and upper limits for the data range
to be created. The left value is the lower limit, and the
right value is the upper limit.
❏ Settings When Event Type is set to PB
-8192~+8191
When Event Type is set to tmp:1.0~300.0
When Event Type is set to other :0~127
• Clock
Determines the number of clocks to be inserted between
each created event.
❏ Settings 001~999
• Curve
Determines the “curve” of the continuous data.
Refer to the graph below for approximate curve shapes.
❏ Settings -16 ~+16
Track
Range
Track and range in which data is extracted
Destination track
Track
Range
Start
point
End point
This distance specified
by Clock
Curve=+16 Curve=0((linear) Curve=-16