180
MOTIF Reference
Song Play mode
Reference Song mode
1 Press any of the GROUP [A] - [D] buttons to select
a Group.
n Each letter group contains sixteen song numbers,
and pressing the appropriate letter selects the first
song in that letter’s group. For example, press
button [A] to select song 01, press button [B] to
select song 17 and so on. (See chart below.)
2 Press any of the NUMBER [1] - [16] buttons to
select a Song and return to the Song Play display.
● Song numbers and the corresponding Group/
Numbers
You can also select a song by moving the cursor to the
song number location and using the [INC/YES] and
[DEC/NO] buttons or the data dial.
Location
The explanations here apply to step #4 of the Basic
Procedure on page 179.
The Song Play mode has a convenient Location
function that lets you jump to user-specified parts of a
song. This lets you assign a specific measure number
in the selected song, and instantly jump to the assigned
measure — either during playback or when the song is
stopped. Two Locations can be assigned.
■ Assigning Locations
Select the desired measure in the recorded song for the
Location. (Highlight “MEAS” and use the [INC/YES]
and [DEC/NO] buttons or data dial.) Then, to assign
the measure to Location 1, simultaneously hold down
the [SET LOCATE] button and press the [G] button.
To assign Location 2, use the [H] button.
■ Jumping to an assigned Location
You can instantly jump to the assigned Location 1 or 2
by simultaneously holding down the [LOCATE] button
and pressing the [G] button (for Location 1) or the
[H] button (for Location 2).
Song track on/off — Solo and Mute
The explanations here apply to step #4 of the Basic
Procedure on page 179.
● To mute a track
Song Number Group Number Song Number Group Number
001 A 1 033 C 1
002 A 2 034 C 2
003 A 3 035 C 3
004 A 4 036 C 4
005 A 5 037 C 5
006 A 6 038 C 6
007 A 7 039 C 7
008 A 8 040 C 8
009 A 9 041 C 9
010 A 10 042 C 10
011 A 11 043 C 11
012 A 12 044 C 12
013 A 13 045 C 13
014 A 14 046 C 14
015 A 15 047 C 15
016 A 16 048 C 16
017 B 1 049 D 1
018 B 2 050 D 2
019 B 3 051 D 3
020 B 4 052 D 4
021 B 5 053 D 5
022 B 6 054 D 6
023 B 7 055 D 7
024 B 8 056 D 8
025 B 9 057 D 9
026 B 10 058 D 10
027 B 11 059 D 11
028 B 12 060 D 12
029 B 13 061 D 13
030 B 14 062 D 14
031 B 15 063 D 15
032 B 16 064 D 16
Specify a measure number
to be registered.
In this example, the selected
measure is assigned to Location
1. The current settings for
Locations 1 and 2 are shown at
the top right of the display.
SEQ
TRANSPORT
LOCATE
1
2
REC
INTEGRATED
SAMPLING
MIXING
UTILITY
EDIT
JOB
STORE
COMPARE
SCENE STORE
SET LOCATE
LOCATE
1
2
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
TRACK
SELECT
MUTE
SOLO
NUMBER
ELEMENT/PERF.PART/ ZONE
