IMX644 Manager Owner’s Manual
11
• Parameter editing area
Here you can use mouse operations to visually edit the various parameters. The screen that is shown will depend on the tab that’s
selected.
• Screen switching tabs
1 [BLOCK] tab
Opens the BLOCK screen (page 12). This shows a block diagram of the entire signal route from input to output, and allows
you to make parameter settings.
2 [INPUT] tab
Opens the INPUT screen (page 16). Here you can edit the input channel parameters.
3 [MATRIX] tab
Opens the MATRIX screen (page 17). Here you can specify the output channels to which the input channel signals are sent.
4 [OUTPUT] tab
Opens the OUTPUT screen (page 18). Here you can edit parameters other than EQ for OUTPUT channels 1–4.
5 [OUTPUT EQ] tab
Opens the OUTPUT EQ screen (page 19). Here you can edit the parameters of the 6-band equalizers provided for OUTPUT
channels 1 through 4.
6 [MISC] tab
Opens the MISC screen (page 21). Here you can edit settings for functions such as Priority Ducker, Music Override, and Feed-
back Suppressor.
7 [GPI] tab
Opens the GPI screen (page 23). Here you can specify the memory that will be recalled for each input port of the GPI connec-
tor, and the make/open status for each output port.
8 [MEMORY] tab
Opens the MEMORY screen (page 24). Here you can save your edited parameter settings in sixteen different memories, or
recall previously-saved settings.
1 2 3 4 5 6 7 8
