114
114
CVP-98/96/600
XPause before the Punch-in point. ...................................................
Press the [PAUSE] button to pause play back a bit before the point at
which you want to start recording. Leave a measure or more before the
Punch-in point so you’ll be able to grasp the timing for the Punch in.
CTurn on the Punch-in/out function. ...............................................
Press the [REC] button.
➔ The PUNCH IN/OUT display appears.
VSelect a track. .......................................................................................................
Press the TRACK < or > buttons or use the data dial or [–/+] buttons
to select the track.
➔ The selected track is indicated by an underline mark.
Use the LCD button at the far right to set the selected track to
RECORD (record enable) or OFF (record/playback disable). PLAY can
only be selected for tracks which contain data. When a track is muted,
the track number is “ghosted” (shown in lighter indication) in the dis-
play.
• Only tracks which allow Punch-in/out
Recording will appear and can be
selected. The rhythm, Auto Accompa-
niment and Harmony tracks cannot be
selected.
Auto Setting of Punch-in/out
• If no other track is selected, the last
recorded track is automatically se-
lected for Punch-in/out.
Song Recording
SONG CONTROL
PAUSE REW FF REC
PLAY
/
STOP
SONG CONTROL
PAUSE REW FF REC
PLAY
/
STOP
