108
108
CVP-98/96/600
CSelect the record mode. ...............................................................
Press the [REC] button.
➔ The [REC] lamp lights and the QUICK RECORD display of
record mode page 1 appears.
Call up page 1 by using the PAGE [<] [>] buttons if the lamp
is lit but the QUICK RECORD display is not shown.
• The song number for recording can be
changed in the QUICK RECORD display.
• If Auto Accompaniment is turned on when
entering the record mode, the
ACMP
&
RHY
track will automatically change to the
REC
display.
VSelect the part for recording. .................................................
In Quick Recording, three parts can be recorded: the right hand
part (1/RIGHT), the left hand part (2/LEFT) and the Auto Accom-
paniment & rhythm part (ACMP &RHY). Press the appropriate
button — 1/RIGHT, 2/LEFT or ACMP&RHY — to set the part
to REC (record enable) or OFF (record/playback disabled). The
PLAY (playback) setting can be selected only for parts which al-
ready contain data.
The ACMP&RHY part can automatically be set to REC by
pressing the panel [ACMP ON] button. To record only the
rhythm, leave ACMP&RHY set to REC, then press the [ACMP
ON] button so that the lamp goes out.
• Both
1/RIGHT
and
2/LEFT
cannot be set to
REC
at the same time.
Tracks Recorded with Harmony, Dual or Split
Functions
• You can record your performance with har-
mony parts using the Harmony function, or
record two different parts by using the Dual or
Split functions. Harmony is recorded to tracks
6, 7 and 8. When using Dual with recording of
the 1/RIGHT part, data is recorded to tracks 1
and 3; when using Split with recording of the 1/
RIGHT part, data is recorded to tracks 1 and 5.
When using Dual with the 2/LEFT part, data is
recorded to tracks 2 and 4; when using Split
with the 2/LEFT part, data is recorded to tracks
2 and 5.
Tracks Recorded Using Auto Accompaniment
• When recording Auto Accompaniment, the
rhythm is recorded to tracks 9 - 10, bass to
track 11, and chordal backing to tracks 12 - 16.
When a part is set to REC (record enable), recording is set to
stand-by and automatically starts when you play the keyboard.
• When the
ACMP
&
RHY
part is set to
REC
, the
metronome will sound to provide a timing guide
in the Synchronized Start mode before record-
ing is started. (The metronome doesn’t sound
when Synchronized Start is released.)
• The Chord Sequence recording method (page
116) lets you record Auto Accompaniment
without having to play chord parts in tempo.
Song Recording
• When any part is displayed in
REC
, the remain-
ing memory capacity of the disk (in kilobytes)
will appear directly below the measure indica-
tion in the display. Empty 2DD and 2HD disks
should have about 690KB and 1400KB, re-
spectively. This is room enough for about
50,000/100,000 notes if no other data is re-
corded.
SONG CONTROL
PAUSE REW FF REC
PLAY
/
STOP
