84 Mixing and Automation
Digital Recording Console 02R Getting Started Guide
Deleting Events
You can delete specific events that have been recorded into the current
automix. You can select a timecode range, the channels desired, and the
specific events you want to delete.
1. Press the [AUTOMIX] button again.
You can stop when the “Event Extract” screen appears:
2. Use the CURSOR buttons to select the channel or channels to
delete.
You can also use the [SEL] buttons to select channels. The following
channels may be selected:
•Tape 1 through 16 – the tape return channels.
• E1 and E2 – the effect return channels.
• STEREO – the stereo bus.
•Mic 1 through 16 – the MIC/LINE input channels.
• 17/18 through 23/24 – the stereo pair line input channels.
3. You must press the [ENTER] button to switch a channel on or off.
If you double-click the [ENTER] button on a selected channel, that channel
will be turned on and all the other channels turned off, or all the channels
will be turned on. The 02R displays a confirmation popup which allows
you to select one channel or all channels:
Use the CURSOR buttons to select “ONE” to turn one channel on and all
the other channels turned off, or select “ALL” to turn all the channels on.
Press the [ENTER] button to execute your choice.
AUTOMIX
