A SERVICE OF

logo

Assembly 39
MAN0577 (6/26/2007)
Install SMV Emblem
1. Attach SMV socket (13) to deck bracket with two
carriage bolts (24) and lock nuts (25).
2. Attach SMV emblem (15) to SMV bracket (14)
using two round head cap screws (26) and hex
nuts (27).
3. Insert SMV bracket (14) and emblem (15) into
socket (13).
Figure 28. TS1680 Pull-Type Cutter Assembly - Rear Half
1. Tailwheel arm
2. Tire & hub
3. Attitude rod
4. Spacer
5. Transport lock-up
6. 3-1/2 x 8 Hydraulic cylinder
7. 1/2 to 1/4 Reducer
8. Elbow with restricter
9. Hose
10. Ratchet adjustment link
11. Stroke control kit
13. SMV Socket
14. SMV Bracket
15. SMV Emblem
16. 1 x 4-1/2 Headless pin
17. 1/4 x 1-1/2 Cotter pin
18. 5/8 NC x 5 HHCS GR5
19. 5/8 NC Lock nut
20. 1/2 NC x 3 HHCS GR5
21. 1/2 NC Flanged lock nut
22. 1" Standard flat washer
23. 1" NC Hex nut
24. 5/16 NC x 3/4 Carriage bolt
25. 5/16 NC Flanged lock nut
26. 1/4 NC x 1/2 Round head screw
27. 1/4 NC Nut
28. Hub
29. 1/2 NF Lug nut
30. 1/ x 5 Headless pin
(Rev. 1/25/2008)