A SERVICE OF

logo

Manual
9/16/2014
PSFDUC3XXXXYXX Viking Technology
Revision B
Page 13 of 18
www.vikingtechnology.com
3 Mechanical Information
The dimensions of the eUSB (version-1) are based on the following
PCB #s: 1208, 1209
As an example, the 1208 PCB would have a 0001208A marking that is
silkscreened at the bottom edge of the PCB near the mounting hole on the same
side as the connector (at bottom side of the eUSB) as shown in the following
figure.
Figure 3-1: Location of PCB # marking
PCB #