A SERVICE OF

logo

Manual
9/16/2014
PSFDUC3XXXXYXX Viking Technology
Revision B
Page 12 of 18
www.vikingtechnology.com
Parameter
Value
Read Endurance
Unlimited
Write or Erase Endurance
3
(specified by the flash component)
Wear-leveling
Global
Data retention >10 years
Notes:
1. MTBF is calculated based on a Part Stress Analysis. It assumes nominal voltage, with all other
parameters within specified range. Telcordia method SR-332 component FIT rate at 55
o
c.
2. Power On/Off Cycles defined as power being removed from the drive, and then restored. Note that host
systems and drive enclosures may remove power from the drive for reasons other than a system
shutdown.
3. SLC NAND has a higher endurance then MLC NAND