A SERVICE OF

logo

Open as PDF
next previous
5
6
8
9
7
Mounting continued
6
With the included screws, attach the 4 placement guide brackets on
to the power modules (2 per power module).
7
Remove the terminal covers by unscrewing the 2 screws and
expose the PDU contacts.
8
Using the 4 placement pegs as a guide, slide the PDU into the
placement guide brackets on the power modules. When lined up
properly, the guidance pegs on the rear of the PDU should t into
the clearance holes on the power modules and a tight connection
will be made.
9
Attach the PDU to the power modules by tightening the 4 screws.