8
17
If your System Type is:
Gas Furnace - Single Stage,gotostep19
Gas Furnace - Multistage,performstep18A
Electric Furnace,performstep18B
Heat Pump,performstep18C
• Note: It may be necessary to go back and review step 6 in the installation section to verify the differences between
the system types.
16
Set Time and Date
a. Press the MENU button twice.
MENU MODE FAN RUN
78
68 H
78 C
11:15 PM
MENU button
b. Scroll up or down to User Settings(itistherstoption),
then press the Select button.
c. Scroll up or down to Set Clock(itistherstoption),then
press the Select button.
Done
Select
User Settings
Set Clock
Filter Service
Maint Service
Screen Timeout
Scroll
up
Scroll
down
Select button
d. Press
3
or
4
to highlight the data you want to change.
e. Scroll up or down (+ or -) to make changes.
f. Press the Setbuttonwhenyouarenished.
Scroll
up
Scroll
down
Set button
Back
Set Clock
Set
Time 10 :15 PM
Date 3 / 23 / 09
Day Mon
g. Press the Done button twice to exit the menu.
System Settings at Thermostat
Done
Select
Menu Selection
User Settings
Usage Graph
ESM Setpoints
ZWave Install
Scroll
up
Scroll
down
Select button
