MORE ABOUT STITCHING
Turning a Corner
Stop stitching at the corner of the fabric.1.
Raise the needle by turning the handwheel counterclockwise.2.
Raise the presser foot and turn the fabric counterclockwise through the 3.
desired angle
Lower the presser foot and begin stitching in the new direction.4.
ZIGZAG STICHING
The zigzag stitch is one of the most common and versatile stitches. It can be a
utility stitch for hemming, overcasting, mending and darning. It can also be used
for appliques or as a decorative stitch.
Overcasting With A Zigzag Stitch
Select a pattern, which is suited for your sewing 1.
needs from the 3 patterns available.
Set the tension.2.
Finish the raw edge of the fabric to prevent it from fraying.3.
Start overcasting about 1/8”(0.3 cm) inside the raw edge of the fabric.4.
The stitches on the right should just clear the fabric edge. Refer to the 5.
illustration for guidance
Page 15
