4
MEMORY MODE
31
■ Programming example 3 — (121.5 MHz, EMER.,AM, SKIP: OFF, ATT: OFF, Aviation to channel F01)
1. Setting the frequency
q Push [V/M] to select VFO mode.
w Rotate [DIAL] or push numeral
keys to enter 121.5 MHz.
2. BANK and memory
channel setting
q While pushing [FUNC], push
[
(V/M)MW].
w While pushing [FUNC], rotate
[DIAL] to select BANK “F”.
e Rotate [DIAL] or push [0] then [1]
to select channel “01”.
3. Programming details
q Push [EDIT] to enter memory set-
ting mode.
w Rotate [DIAL] until the character
“E” appears then push [ENT] or
push [3] twice to enter the “E.”
e Rotate the [DIAL] then push [ENT]
to enter the characters ”M”, “E”,
“R” and “.” for memory names or
push numeral keys (see page 72
for alphanumeric key assign-
ments).
