A SERVICE OF

logo

10
PDT 8000 Series
Starting the Terminal
Press the red power button to turn the terminal on. If the terminal
does not power on see Troubleshooting on page 25.
As the terminal initializes its unique Flash File system, the Symbol
splash screen displays for about 60 seconds. When the Welcome
screen appears, tap anywhere on the screen to continue to the
Align screen. Note that these screens also appear every time you
perform a hard reset.
Aligning the Screen
To align your terminal so the cursor on the touch screen aligns with
the tip of your stylus:
1. If necessary, adjust the contrast on the terminal so the
screen is readable (see Adjusting the Backlight on page 11).
2. Remove the stylus from the handstrap of the terminal.
Power
Button