48
GB
a) This receiver corrects signals by analog
downmix processing only for the center speaker
and sub woofer when the multi-channel input is
selected. The correction is invalid for other
speakers.
b) The measurement result is not utilized when the
multi-channel input is selected.
c) • Signals with a sampling frequency of more than
96 kHz are always played back at either
44.1 kHz or 48 kHz.
• The measurement result is not utilized in the
following cases.
–The multi-channel input is selected.
–“2ch Analog Direct” is being used.
–Dolby TrueHD signals with a sampling
frequency of more than 96 kHz are being
received.
1 Press AMP MENU to display the
GUI menu on the TV screen.
If “GUI MODE” is not displayed in the
display window of the receiver, follow the
steps given in “7: Operating the receiver
using the GUI (Graphical User
Interface)” (page 41).
2 Press V/v repeatedly to select
“Settings,” then press or b.
The Settings menu list appears on the TV
screen.
3 Press V/v repeatedly to select
“Auto Calibration,” then press
or b.
4 Press V/v repeatedly to select
“Quick Setup,” then press .
5 Press V/v repeatedly and to
un-check the items you do not
want to measure.
• Speaker Distance
• Speaker Level
• Frequency Characteristic
6 Press b.
7 Press to select “Start.”
8 The measurement starts in five
seconds.
2-7
1
