Setting Up the TV
53
Setting Up the TV
KDX-46Q005
2-592-150-12(2)
DVD Player or
Digital Satellite
Receiver via an AV
Receiver with
CENTER SPEAKER
IN Terminals
Use this connection if you have a digital audio device that is PCM/Dolby
Digital compatible, such as an AV receiver with a Dolby Pro Logic system
decoder.
Disconnect all power sources before making any connections.
1 Using a speaker cord, connect the TV’s CENTER SPEAKER IN
terminals to the AV receiver’s CENTER SPEAKER OUT terminals.
2 Using a component video cable, connect the DVD player or digital
satellite receiver’s YP
BPR jacks to the YPBPR jacks on the TV. Use the
HD/DVD IN 4 connections. Using an audio cable, connect the DVD
player or digital satellite receiver’s AUDIO OUT to the TV’s AUDIO IN
jacks.
3 Using an optical digital cable, connect the DVD player or digital
satellite receiver’s OPTICAL OUT jack to the AV receiver’s OPTICAL
IN jack.
✍ If your DVD player does not have component (YPBPR) jacks, you can
connect the DVD player with A/V connectors. Use the connection
described on page 45.
✍ If your digital satellite receiver has an HDMI connector, use the
connection described on page 51 for best picture quality.
(Continued)
